In the present vignette, we want to discuss how to specify
phylogenetic multilevel models using **brms**. These models
are relevant in evolutionary biology when data of many species are
analyzed at the same time. The usual approach would be to model species
as a grouping factor in a multilevel model and estimate varying
intercepts (and possibly also varying slopes) over species. However,
species are not independent as they come from the same phylogenetic tree
and we thus have to adjust our model to incorporate this dependency. The
examples discussed here are from chapter 11 of the book *Modern
Phylogenetic Comparative Methods and the application in Evolutionary
Biology* (de Villemeruil & Nakagawa, 2014). The necessary data
can be downloaded from the corresponding website (https://www.mpcm-evolution.com/). Some of these models
may take a few minutes to fit.

Assume we have measurements of a phenotype, `phen`

(say
the body size), and a `cofactor`

variable (say the
temperature of the environment). We prepare the data using the following
code.

```
phylo <- ape::read.nexus("https://paul-buerkner.github.io/data/phylo.nex")
data_simple <- read.table(
"https://paul-buerkner.github.io/data/data_simple.txt",
header = TRUE
)
head(data_simple)
```

```
phen cofactor phylo
1 107.06595 10.309588 sp_1
2 79.61086 9.690507 sp_2
3 116.38186 15.007825 sp_3
4 143.28705 19.087673 sp_4
5 139.60993 15.658404 sp_5
6 68.50657 6.005236 sp_6
```

The `phylo`

object contains information on the
relationship between species. Using this information, we can construct a
covariance matrix of species (Hadfield & Nakagawa, 2010).

Now we are ready to fit our first phylogenetic multilevel model:

```
model_simple <- brm(
phen ~ cofactor + (1|gr(phylo, cov = A)),
data = data_simple,
family = gaussian(),
data2 = list(A = A),
prior = c(
prior(normal(0, 10), "b"),
prior(normal(0, 50), "Intercept"),
prior(student_t(3, 0, 20), "sd"),
prior(student_t(3, 0, 20), "sigma")
)
)
```

With the exception of `(1|gr(phylo, cov = A))`

instead of
`(1|phylo)`

this is a basic multilevel model with a varying
intercept over species (`phylo`

is an indicator of species in
this data set). However, by using `cov = A`

in the
`gr`

function, we make sure that species are correlated as
specified by the covariance matrix `A`

. We pass
`A`

itself via the `data2`

argument which can be
used for any kinds of data that does not fit into the regular structure
of the `data`

argument. Setting priors is not required for
achieving good convergence for this model, but it improves sampling
speed a bit. After fitting, the results can be investigated in
detail.

```
Family: gaussian
Links: mu = identity; sigma = identity
Formula: phen ~ cofactor + (1 | gr(phylo, cov = A))
Data: data_simple (Number of observations: 200)
Draws: 4 chains, each with iter = 2000; warmup = 1000; thin = 1;
total post-warmup draws = 4000
Group-Level Effects:
~phylo (Number of levels: 200)
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept) 14.41 2.17 10.38 18.83 1.00 975 1739
Population-Level Effects:
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
Intercept 38.28 7.00 24.65 52.35 1.00 2375 2489
cofactor 5.18 0.14 4.91 5.45 1.00 6530 2906
Family Specific Parameters:
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sigma 9.25 0.74 7.89 10.75 1.00 1201 1622
Draws were sampled using sampling(NUTS). For each parameter, Bulk_ESS
and Tail_ESS are effective sample size measures, and Rhat is the potential
scale reduction factor on split chains (at convergence, Rhat = 1).
```

The so called phylogenetic signal (often symbolize by \(\lambda\)) can be computed with the
`hypothesis`

method and is roughly \(\lambda = 0.7\) for this example.

```
hyp <- "sd_phylo__Intercept^2 / (sd_phylo__Intercept^2 + sigma^2) = 0"
(hyp <- hypothesis(model_simple, hyp, class = NULL))
```

```
Hypothesis Tests for class :
Hypothesis Estimate Est.Error CI.Lower CI.Upper Evid.Ratio Post.Prob Star
1 (sd_phylo__Interc... = 0 0.7 0.09 0.51 0.84 NA NA *
---
'CI': 90%-CI for one-sided and 95%-CI for two-sided hypotheses.
'*': For one-sided hypotheses, the posterior probability exceeds 95%;
for two-sided hypotheses, the value tested against lies outside the 95%-CI.
Posterior probabilities of point hypotheses assume equal prior probabilities.
```

Note that the phylogenetic signal is just a synonym of the intra-class correlation (ICC) used in the context phylogenetic analysis.

Often, we have multiple observations per species and this allows to fit more complicated phylogenetic models.

```
data_repeat <- read.table(
"https://paul-buerkner.github.io/data/data_repeat.txt",
header = TRUE
)
data_repeat$spec_mean_cf <-
with(data_repeat, sapply(split(cofactor, phylo), mean)[phylo])
head(data_repeat)
```

```
phen cofactor species phylo spec_mean_cf
1 107.41919 11.223724 sp_1 sp_1 10.309588
2 109.16403 9.805934 sp_1 sp_1 10.309588
3 91.88672 10.308423 sp_1 sp_1 10.309588
4 121.54341 8.355349 sp_1 sp_1 10.309588
5 105.31638 11.854510 sp_1 sp_1 10.309588
6 64.99859 4.314015 sp_2 sp_2 3.673914
```

The variable `spec_mean_cf`

just contains the mean of the
cofactor for each species. The code for the repeated measurement
phylogenetic model looks as follows:

```
model_repeat1 <- brm(
phen ~ spec_mean_cf + (1|gr(phylo, cov = A)) + (1|species),
data = data_repeat,
family = gaussian(),
data2 = list(A = A),
prior = c(
prior(normal(0,10), "b"),
prior(normal(0,50), "Intercept"),
prior(student_t(3,0,20), "sd"),
prior(student_t(3,0,20), "sigma")
),
sample_prior = TRUE, chains = 2, cores = 2,
iter = 4000, warmup = 1000
)
```

The variables `phylo`

and `species`

are
identical as they are both identifiers of the species. However, we model
the phylogenetic covariance only for `phylo`

and thus the
`species`

variable accounts for any specific effect that
would be independent of the phylogenetic relationship between species
(e.g., environmental or niche effects). Again we can obtain model
summaries as well as estimates of the phylogenetic signal.

```
Family: gaussian
Links: mu = identity; sigma = identity
Formula: phen ~ spec_mean_cf + (1 | gr(phylo, cov = A)) + (1 | species)
Data: data_repeat (Number of observations: 1000)
Draws: 2 chains, each with iter = 4000; warmup = 1000; thin = 1;
total post-warmup draws = 6000
Group-Level Effects:
~phylo (Number of levels: 200)
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept) 16.41 1.89 12.82 20.31 1.00 1444 2209
~species (Number of levels: 200)
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept) 4.99 0.84 3.31 6.60 1.00 947 1468
Population-Level Effects:
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
Intercept 36.24 7.76 21.11 51.98 1.00 3734 3551
spec_mean_cf 5.10 0.11 4.89 5.31 1.00 7681 4287
Family Specific Parameters:
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sigma 8.11 0.20 7.73 8.53 1.00 5348 4033
Draws were sampled using sampling(NUTS). For each parameter, Bulk_ESS
and Tail_ESS are effective sample size measures, and Rhat is the potential
scale reduction factor on split chains (at convergence, Rhat = 1).
```

```
hyp <- paste(
"sd_phylo__Intercept^2 /",
"(sd_phylo__Intercept^2 + sd_species__Intercept^2 + sigma^2) = 0"
)
(hyp <- hypothesis(model_repeat1, hyp, class = NULL))
```

```
Hypothesis Tests for class :
Hypothesis Estimate Est.Error CI.Lower CI.Upper Evid.Ratio Post.Prob Star
1 (sd_phylo__Interc... = 0 0.74 0.06 0.61 0.84 0 0 *
---
'CI': 90%-CI for one-sided and 95%-CI for two-sided hypotheses.
'*': For one-sided hypotheses, the posterior probability exceeds 95%;
for two-sided hypotheses, the value tested against lies outside the 95%-CI.
Posterior probabilities of point hypotheses assume equal prior probabilities.
```

So far, we have completely ignored the variability of the cofactor within species. To incorporate this into the model, we define

and then fit it again using `within_spec_cf`

as an
additional predictor.

```
model_repeat2 <- update(
model_repeat1, formula = ~ . + within_spec_cf,
newdata = data_repeat, chains = 2, cores = 2,
iter = 4000, warmup = 1000
)
```

The results are almost unchanged, with apparently no relationship
between the phenotype and the within species variance of
`cofactor`

.

```
Family: gaussian
Links: mu = identity; sigma = identity
Formula: phen ~ spec_mean_cf + (1 | gr(phylo, cov = A)) + (1 | species) + within_spec_cf
Data: data_repeat (Number of observations: 1000)
Draws: 2 chains, each with iter = 4000; warmup = 1000; thin = 1;
total post-warmup draws = 6000
Group-Level Effects:
~phylo (Number of levels: 200)
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept) 16.45 1.98 12.80 20.60 1.00 1413 1885
~species (Number of levels: 200)
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept) 4.97 0.87 3.16 6.57 1.00 1088 1158
Population-Level Effects:
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
Intercept 36.16 7.86 20.78 51.33 1.00 4340 3839
spec_mean_cf 5.10 0.11 4.89 5.31 1.00 8709 4197
within_spec_cf -0.06 0.18 -0.42 0.30 1.00 9545 4109
Family Specific Parameters:
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sigma 8.11 0.21 7.72 8.54 1.00 5797 3779
Draws were sampled using sampling(NUTS). For each parameter, Bulk_ESS
and Tail_ESS are effective sample size measures, and Rhat is the potential
scale reduction factor on split chains (at convergence, Rhat = 1).
```

Also, the phylogenetic signal remains more or less the same.

```
hyp <- paste(
"sd_phylo__Intercept^2 /",
"(sd_phylo__Intercept^2 + sd_species__Intercept^2 + sigma^2) = 0"
)
(hyp <- hypothesis(model_repeat2, hyp, class = NULL))
```

```
Hypothesis Tests for class :
Hypothesis Estimate Est.Error CI.Lower CI.Upper Evid.Ratio Post.Prob Star
1 (sd_phylo__Interc... = 0 0.74 0.06 0.61 0.84 0 0 *
---
'CI': 90%-CI for one-sided and 95%-CI for two-sided hypotheses.
'*': For one-sided hypotheses, the posterior probability exceeds 95%;
for two-sided hypotheses, the value tested against lies outside the 95%-CI.
Posterior probabilities of point hypotheses assume equal prior probabilities.
```

Let’s say we have Fisher’s z-transformed correlation coefficients \(Zr\) per species along with corresponding sample sizes (e.g., correlations between male coloration and reproductive success):

```
data_fisher <- read.table(
"https://paul-buerkner.github.io/data/data_effect.txt",
header = TRUE
)
data_fisher$obs <- 1:nrow(data_fisher)
head(data_fisher)
```

```
Zr N phylo obs
1 0.28917549 13 sp_1 1
2 0.02415579 40 sp_2 2
3 0.19513651 39 sp_3 3
4 0.09831239 40 sp_4 4
5 0.13780152 66 sp_5 5
6 0.13710587 41 sp_6 6
```

We assume the sampling variance to be known and as \(V(Zr) = \frac{1}{N - 3}\) for Fisher’s
values, where \(N\) is the sample size
per species. Incorporating the known sampling variance into the model is
straight forward. One has to keep in mind though, that
**brms** requires the sampling standard deviation (square
root of the variance) as input instead of the variance itself. The
group-level effect of `obs`

represents the residual variance,
which we have to model explicitly in a meta-analytic model.

```
model_fisher <- brm(
Zr | se(sqrt(1 / (N - 3))) ~ 1 + (1|gr(phylo, cov = A)) + (1|obs),
data = data_fisher, family = gaussian(),
data2 = list(A = A),
prior = c(
prior(normal(0, 10), "Intercept"),
prior(student_t(3, 0, 10), "sd")
),
control = list(adapt_delta = 0.95),
chains = 2, cores = 2, iter = 4000, warmup = 1000
)
```

A summary of the fitted model is obtained via

```
Family: gaussian
Links: mu = identity; sigma = identity
Formula: Zr | se(sqrt(1/(N - 3))) ~ 1 + (1 | gr(phylo, cov = A)) + (1 | obs)
Data: data_fisher (Number of observations: 200)
Draws: 2 chains, each with iter = 4000; warmup = 1000; thin = 1;
total post-warmup draws = 6000
Group-Level Effects:
~obs (Number of levels: 200)
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept) 0.05 0.03 0.00 0.10 1.00 820 1759
~phylo (Number of levels: 200)
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept) 0.07 0.04 0.00 0.14 1.00 868 2009
Population-Level Effects:
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
Intercept 0.16 0.04 0.08 0.24 1.00 4750 3278
Family Specific Parameters:
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sigma 0.00 0.00 0.00 0.00 NA NA NA
Draws were sampled using sampling(NUTS). For each parameter, Bulk_ESS
and Tail_ESS are effective sample size measures, and Rhat is the potential
scale reduction factor on split chains (at convergence, Rhat = 1).
```

The meta-analytic mean (i.e., the model intercept) is \(0.16\) with a credible interval of \([0.08, 0.25]\). Thus the mean correlation across species is positive according to the model.

Suppose that we analyze a phenotype that consists of counts instead of being a continuous variable. In such a case, the normality assumption will likely not be justified and it is recommended to use a distribution explicitly suited for count data, for instance the Poisson distribution. The following data set (again retrieved from mpcm-evolution.org) provides an example.

```
data_pois <- read.table(
"https://paul-buerkner.github.io/data/data_pois.txt",
header = TRUE
)
data_pois$obs <- 1:nrow(data_pois)
head(data_pois)
```

```
phen_pois cofactor phylo obs
1 1 7.8702830 sp_1 1
2 0 3.4690529 sp_2 2
3 1 2.5478774 sp_3 3
4 14 18.2286628 sp_4 4
5 1 2.5302806 sp_5 5
6 1 0.5145559 sp_6 6
```

As the Poisson distribution does not have a natural overdispersion
parameter, we model the residual variance via the group-level effects of
`obs`

(e.g., see Lawless, 1987).

```
model_pois <- brm(
phen_pois ~ cofactor + (1|gr(phylo, cov = A)) + (1|obs),
data = data_pois, family = poisson("log"),
data2 = list(A = A),
chains = 2, cores = 2, iter = 4000,
control = list(adapt_delta = 0.95)
)
```

Again, we obtain a summary of the fitted model via

```
Family: poisson
Links: mu = log
Formula: phen_pois ~ cofactor + (1 | gr(phylo, cov = A)) + (1 | obs)
Data: data_pois (Number of observations: 200)
Draws: 2 chains, each with iter = 4000; warmup = 2000; thin = 1;
total post-warmup draws = 4000
Group-Level Effects:
~obs (Number of levels: 200)
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept) 0.18 0.09 0.01 0.34 1.00 539 488
~phylo (Number of levels: 200)
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept) 0.18 0.10 0.02 0.40 1.00 669 1041
Population-Level Effects:
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
Intercept -2.08 0.21 -2.50 -1.68 1.00 2172 2273
cofactor 0.25 0.01 0.23 0.27 1.00 3072 2931
Draws were sampled using sampling(NUTS). For each parameter, Bulk_ESS
and Tail_ESS are effective sample size measures, and Rhat is the potential
scale reduction factor on split chains (at convergence, Rhat = 1).
```

Now, assume we ignore the fact that the phenotype is count data and fit a linear normal model instead.

```
model_normal <- brm(
phen_pois ~ cofactor + (1|gr(phylo, cov = A)),
data = data_pois, family = gaussian(),
data2 = list(A = A),
chains = 2, cores = 2, iter = 4000,
control = list(adapt_delta = 0.95)
)
```

```
Family: gaussian
Links: mu = identity; sigma = identity
Formula: phen_pois ~ cofactor + (1 | gr(phylo, cov = A))
Data: data_pois (Number of observations: 200)
Draws: 2 chains, each with iter = 4000; warmup = 2000; thin = 1;
total post-warmup draws = 4000
Group-Level Effects:
~phylo (Number of levels: 200)
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sd(Intercept) 0.66 0.48 0.03 1.79 1.00 1073 1655
Population-Level Effects:
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
Intercept -3.05 0.62 -4.30 -1.81 1.00 3749 2644
cofactor 0.68 0.04 0.60 0.76 1.00 7972 2945
Family Specific Parameters:
Estimate Est.Error l-95% CI u-95% CI Rhat Bulk_ESS Tail_ESS
sigma 3.44 0.19 3.11 3.82 1.00 4900 2592
Draws were sampled using sampling(NUTS). For each parameter, Bulk_ESS
and Tail_ESS are effective sample size measures, and Rhat is the potential
scale reduction factor on split chains (at convergence, Rhat = 1).
```

We see that `cofactor`

has a positive relationship with
the phenotype in both models. One should keep in mind, though, that the
estimates of the Poisson model are on the log-scale, as we applied the
canonical log-link function in this example. Therefore, estimates are
not comparable to a linear normal model even if applied to the same
data. What we can compare, however, is the model fit, for instance
graphically via posterior predictive checks.

Apparently, the distribution of the phenotype predicted by the Poisson model resembles the original distribution of the phenotype pretty closely, while the normal models fails to do so. We can also apply leave-one-out cross-validation for direct numerical comparison of model fit.

```
Output of model 'model_pois':
Computed from 4000 by 200 log-likelihood matrix
Estimate SE
elpd_loo -348.8 17.1
p_loo 30.2 3.5
looic 697.7 34.1
------
Monte Carlo SE of elpd_loo is NA.
Pareto k diagnostic values:
Count Pct. Min. n_eff
(-Inf, 0.5] (good) 169 84.5% 304
(0.5, 0.7] (ok) 28 14.0% 140
(0.7, 1] (bad) 3 1.5% 149
(1, Inf) (very bad) 0 0.0% <NA>
See help('pareto-k-diagnostic') for details.
Output of model 'model_normal':
Computed from 4000 by 200 log-likelihood matrix
Estimate SE
elpd_loo -536.0 15.9
p_loo 9.8 2.2
looic 1071.9 31.7
------
Monte Carlo SE of elpd_loo is 0.1.
Pareto k diagnostic values:
Count Pct. Min. n_eff
(-Inf, 0.5] (good) 196 98.0% 768
(0.5, 0.7] (ok) 4 2.0% 604
(0.7, 1] (bad) 0 0.0% <NA>
(1, Inf) (very bad) 0 0.0% <NA>
All Pareto k estimates are ok (k < 0.7).
See help('pareto-k-diagnostic') for details.
Model comparisons:
elpd_diff se_diff
model_pois 0.0 0.0
model_normal -187.1 18.1
```

Since smaller values of loo indicate better fit, it is again evident
that the Poisson model fits the data better than the normal model. Of
course, the Poisson model is not the only reasonable option here. For
instance, you could use a negative binomial model (via family
`negative_binomial`

), which already contains an
overdispersion parameter so that modeling a varying intercept of
`obs`

becomes obsolete.

In the above examples, we have only used a single group-level effect
(i.e., a varying intercept) for the phylogenetic grouping factors. In
**brms**, it is also possible to estimate multiple
group-level effects (e.g., a varying intercept and a varying slope) for
these grouping factors. However, it requires repeatedly computing
Kronecker products of covariance matrices while fitting the model. This
will be very slow especially when the grouping factors have many levels
and matrices are thus large.

de Villemeruil P. & Nakagawa, S. (2014) General quantitative
genetic methods for comparative biology. In: *Modern phylogenetic
comparative methods and their application in evolutionary biology:
concepts and practice* (ed. Garamszegi L.) Springer, New York.
pp. 287-303.

Hadfield, J. D. & Nakagawa, S. (2010) General quantitative
genetic methods for comparative biology: phylogenies, taxonomies, and
multi-trait models for continuous and categorical characters.
*Journal of Evolutionary Biology*. 23. 494-508.

Lawless, J. F. (1987). Negative binomial and mixed Poisson
regression. *Canadian Journal of Statistics*, 15(3), 209-225.